The hottest Suqian small industrial machine tool m

Suqian small industrial machine tool manufacturer

Suqian small industrial machine tool manufacturer k2d6m has three forms of support plates. (1) When the drag chain needs to bear large pipe and cable loads, the degree support plate should be selected - the whole block type (2) when the pipe joint size of the pipe and cable is larger than the inner cavity aperture of the support plate, or it needs to be disassembled and repaired frequently. Support plate can be selected - separate type (3) when there are many specifications and varieties of pipe and cable, support plate frame type drag chain design parameters drag chain material: cold rolled steel and stainless steel. The type of drag chain, the total width of drag chain, the length of drag chain, the type of support plate, the size of the built-in hole of the support plate, and the bending radius of the drag chain. The characteristics of steel aluminum drag chain are suitable for all transmission modes. It can be lengthened and shortened at will. TLG steel drag chain can carry a large number of cables and oil pipes with large weight, and the suspension length is large. The support plate can be made according to the needs of customers, and can be used in machine tools, machinery, etc. in addition, The bending radius can be changed by changing the pin shaft. The structure of the drag chain: the shape of the drag chain is like a tank chain, which is composed of many unit links, and the links rotate freely. The inner height, outer height and pitch of the drag chain of the same series are the same, and the inner height and bending radius r of the drag chain can be selected differently. It is used to make screw

rail plate and undergo surface anti-corrosion treatment. The internal structure is assembled by heat-treated steel strip. The structure of this product is tight, reasonable and noiseless. It is suitable for

Suqian small industrial machine tool manufacturer

the unit chain link is composed of left and right chain plates and upper and lower cover plates. Each link of the drag chain can be opened, which is convenient for assembly and disassembly. There is no need to thread. After opening the cover plate, cables, oil pipes, gas pipes, etc. can be put into the drag chain. In addition, separators can be provided to separate the space in the chain as required. The application scope of drag chain is metallurgy, mining, petroleum, chemical industry, machinery, electric power, lifting, transportation, fire protection, shipping, military industry and other industries. The main body of TL series drag chain is the effect of vibration by chain plate, which includes: 1. The strength of the structure 2. The loosening of the combination 3. The wear of protective materials (steel plate chrome plating), support plate (extruded aluminum alloy), shaft pin (alloy steel) and other components, so that there is no relative movement between cable or rubber tube and drag chain, There is no distortion and deformation. The chain plate is chrome plated, with novel shape STR2, reasonable structure, dexterity, high strength, no deformation in rigidity, convenient installation, reliable use, easy disassembly and assembly. In particular, it must attract the attention of the whole industry. It is that this product adopts high wear-resistant materials, and the alloy is the shaft pin, which improves the wear-resistant strength of the product, makes bending more flexible, has less resistance, and reduces the noise, so that it can not deform and sag for a long time. There is a hard steel ring support inside, which can support at high temperature 110

this product has a beautiful appearance, which can greatly enhance the overall artistic beauty of machine tools and equipment STR2, and enhance the competitiveness of China's machine tools and mechanical equipment in the international market. 1. The drag chain can adapt to a certain speed of 40 meters/minute. 2. At high speed, the noise sound pressure level of the drag chain is not greater than 68 dB. 3. The safe service life of the drag chain shall not be less than 1million times (reciprocating). When the drag chain needs to carry a large load of pipes and cables, it should choose the degree support plate - integral type. When the pipe joint size of the pipe and cable is larger than the inner cavity aperture of the support plate or it needs to be disassembled and repaired frequently, it can choose the support plate - separate type. When there are many specifications and varieties of pipe cables, the support plate cabinet rack type can be selected. The structure of threading drag chain the drag chain looks like a tank chain and is composed of many unit links, which rotate freely. The inner height, outer height and pitch of the drag chain of the same series are the same. The inner height and bending radius r of the drag chain can be selected differently. The unit chain link is composed of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened. It is convenient to install and disassemble. There is no need to thread. After opening the cover plate, the cable, oil pipe, gas pipe, etc. can be put into the drag chain. The size can be made according to the actual needs, and its surface is smooth. The modeling rules

in addition, separators can be provided to separate the space in the chain as needed. Basic parameter material of drag chain: reinforced nylon, with high pressure and tensile load, good toughness, high elasticity, wear resistance and flame retardant. High and low temperature BT property 1 Our company adopts the after-sales service system combining regular return visits and telephone consultation at any time, which can be stable and can be used outdoors. Resistance to oil and salt: it has certain acid and alkali resistance. Operating speed and acceleration: the high speed can reach 5m/s, and the high acceleration can reach 5m/S (the specific speed and acceleration depend on the operation). Operating life: under normal overhead use, it can reach 5million times of reciprocating motion (the specific life depends on the idling condition). The bar guard includes a circular

process of cutting off the workpiece angle with a die. 20. Punching: refers to punching a shaped hole on a workpiece with a die on an ordinary punch or CNC punch

Suqian small industrial machine tool manufacturer

tank chain the outside of the tank chain is like the tank chain of military equipment, which is composed of many unit links, and the links rotate freely. The tank chain of the same series has the same inner height, outer height and pitch. The inner width and bending radius r of the drag chain can be different. The unit chain link of the tank chain is composed of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened, which is convenient for assembly and disassembly. There is no need to thread. After opening the cover plate, the electric cable, oil pipe, gas pipe, water pipe, etc. can be put into the drag chain. Basic parameters of tank chain: high pressure and tensile load, good toughness, high elasticity and wear resistance, flame retardant, stable performance at high and low temperatures, and can be used outdoors. Resistance: resistant to oil and salt, and has certain acid and alkali resistance. The color is round

the running speed of the tank chain is stable. Tank chains are generally used in cables, oil pipes, gas pipes, water pipes and air ducts of machine tools and machinery, for traction and protection. The use of tank chain originated in Europe, and later the structure was quoted and innovated in China. Now the tank chain has been widely used on machine tools, which protects the cables and makes the machine tools look more beautiful as a whole. Tank chain, whose shape is rectangular metal hose, protective sleeve, bellows and plastic coated metal hose all belong to cable protection products. Tank chain is divided into steel tank chain and plastic tank chain. Steel tank chain is made of steel and aluminum and can be customized. Plastic tank chain is also known as engineering drag chain and tank chain. Tank chain can be divided into bridge tank chain, fully enclosed tank chain and semi enclosed tank chain according to the use environment and requirements. The space in the chain is divided into the structure of the protective cover of the machine tool as required. The main body of the protective cover of the machine tool is composed of the chain

the use and characteristics of the tank chain. The main body of the tank chain is composed of chain wrench, support wrench, axle pin and other components, so that there is no relative movement between the cable or rubber tube and the drag chain, and there is no distortion and deformation. The chain wrench is chrome plated, and the shape STR2 is novel, reasonable, dexterous and high strength, no deformation in rigidity, convenient installation and reliable use, It is easy to disassemble and assemble, especially the wear-resistant material is used, and the alloy copper is used as the shaft pin, which improves the wear-resistant strength of the product, makes the bending more flexible, reduces the resistance, and reduces the noise, so that it can be used for a long time without deformation and sagging. The tank chain can adapt to high speed of 40 meters/minute. When the tank chain is at high speed, the noise sound pressure level is not greater than 68 dB. The safe service life of tank chain shall not be less than 1million times (reciprocating). If you only make molds, you must report the height

and the pitch is the same. The inner width and bending radius r of the drag chain can be different. The unit chain link of the tank chain is composed of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened. The purpose of the tank chain of Suqian small industrial machine tool manufacturer

<1) the tank chain is suitable for the occasion of reciprocating motion, and can be used for the built-in cables, oil pipes, gas pipes Water pipes play the role of traction and protection. (2) Each section of the tank chain can be opened for installation and maintenance. It has low noise and wear resistance when moving, and can move at high speed. (3) Tank chains have been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, door and window machinery, injection molding machines, manipulators, overweight transportation equipment, automated warehouses, etc. Characteristics of tank chain (1) the shape of drag chain is like tank chain, which is composed of many unit links, and the links rotate freely. (2) The inner height, outer height and pitch of the drag chain of the same series are the same, and the inner width and bending radius r of the drag chain can be selected differently. Due to the actions of upper and lower supports and 16.0 rotation of the workbench

(3) the unit chain link is composed of left and right chain plates and upper and lower cover plates. Each section of the drag chain can be opened, which is convenient for assembly and disassembly, and there is no need to thread. After opening the cover plate, cables, oil pipes, gas pipes, water pipes, etc. can be put into the drag chain. (4) In addition, separators can be provided to separate the space in the chain as required., Laser product technology has always been in the forefront of the world. Hengfat machine tool protective cover manufacturer newly enters tongkuai large laser cutting machine, which is mainly used for multimedia platform